Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: 1884-needs Arizona Gunsmith
Posted by Tony Beck on Thursday, 10 January 2019, at 8:11 a.m., in response to Re: 1884-needs Arizona Gunsmith, posted by John 'JR' Hunt on Wednesday, 9 January 2019, at 9:58 p.m.
I have use shim to tighten up a breech screw on a '66. Worked fine and headspace turned out tighter than most. It's a little tricky getting the shim in so it doesn't show.
Post a New Response
Return to the Trapdoor Collector home page via this link.