Trapdoor Collector Discussion Board
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: Help with extractor plunger
Posted by Jason Clements on Sunday, 15 October 2017, at 9:36 a.m., in response to Re: Help with extractor plunger, posted by Tom Trevor on Saturday, 14 October 2017, at 9:43 p.m.
Thanks, I've got about .600, so there's something in there.
In fact, after some prising and scraping, it appears that at some point the spindle and spring have corroded in place and the remains are stuck in there. Might try soaking or in WD 40 to see if that will loan up the corrosion enough for me to extract the spindle.
Progress at least.
Post a New Response
Return to the Trapdoor Collector home page via this link.