Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]


Re: Help with extractor plunger

Posted by D Miller on Saturday, 14 October 2017, at 4:21 p.m., in response to Help with extractor plunger, posted by Jason Clements on Saturday, 14 October 2017, at 11:25 a.m.

I can hazard a guess. There is no hole at the bottom of the hole. You say there was an incorrect spring and plunger. I suspect the "gunsmith" may have put some kind of spacer at the bottom of the extractor recess to compensate for the shorter and weaker spring. Try to carefully see if you can remove whatever is in the recess. Small screw driver, ice pick or whatever. Re-installing the breech block can cause you problems if you are not familiar with how it is done. Good luck


Responses


Post a New Response

Your Name:

E-Mail Address:

Subject:

Please answer the riddle feature to prevent spam:    6 + 15 + 0 =

Message:



Return to the Trapdoor Collector home page via this link.