Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: H&R trapdoor
Posted by Bill on Monday, 9 March 2015, at 7:41 p.m., in response to Re: H&R trapdoor, posted by Dick Hosmer on Monday, 9 March 2015, at 1:33 p.m.
I replaced the latch on my OM with an origihal latch assy.,.all that was required was to enlarge the opening for the retaining plate. I think even the screw lined up. I had to use a carbide mill to machine the hardened breech bolt. Then fit the latch to lock up in the correct place.
Post a New Response
Return to the Trapdoor Collector home page via this link.