Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]

Re: H4895

Posted by Ernie Brandt on Tuesday, 5 August 2014, at 10:18 p.m., in response to Re: H4895, posted by Larry Gibson on Tuesday, 5 August 2014, at 9:53 p.m.


I would like to try the 4895 some time. It appears to be a good fit for the TD. I would probably load the 330 grain bullets at 47-48 grains of powder. Hodgdon book states that you can load to 50 grains with a 300 gr. bullet at 20,900 cup. This would be a good load for deer season. I have a Custom TD rifle I built that I want to go hunting with. I'm sure this load would knock down Bamby in Missouri.

I am lucky enough to live within a short drive from Hodgdon's store/range.

When you tested the load did you have the case crimped over the bullet or was it loose fit. I crimp all my loads. All except jacketed rounds.

Ernie B.


Post a New Response

Your Name:

E-Mail Address:


Please answer the riddle feature to prevent spam:    10 (plus+) 2 (equals =)


Return to the Trapdoor Collector home page via this link.