Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next ]
Re: Acme Bullets
Posted by Tom Trevor on Monday, 27 January 2014, at 12:12 p.m., in response to Re: Acme Bullets, posted by Thomas Jacobson on Monday, 27 January 2014, at 11:17 a.m.
HUH!, While your bore may well be .452 nominal was .450 the depth of the grooves being .005 would give you .462. Thus the bullet at .459 might work but not very well unless cast soft such as 40-1 lead- tin. Most serious shooters use a custom mould casting .461-.462 for the best results. Hope this clears it up a bit.
Post a New Response
Return to the Trapdoor Collector home page via this link.