Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: follow up
Posted by Ernie Brandt on Monday, 1 July 2013, at 6:48 p.m., in response to Re: follow up, posted by Art Todd on Monday, 1 July 2013, at 3:07 p.m.
You can add an extension onto the reamers. I think Brownell's has them. This will allow you to do the work with the receiver attached. However.................
I do not recommend using a reamer to clean up the chamber. That's not a good idea. You may wind up removing too much material & this will cause the case to swell or worst case rupture. Chamber reamers are VERY sharp & cut quickly. Head-spare can also be compromised if the reamer removes material from the case rim area.
If all else fails & the rifle is not of great value to you (your Granddad's, etc), a barrel replacement is the way to go.
Post a New Response
Return to the Trapdoor Collector home page via this link.