Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]


Re: follow up

Posted by Ernie Brandt on Saturday, 29 June 2013, at 9:03 a.m., in response to Re: follow up, posted by Tom Trevor on Friday, 28 June 2013, at 10:24 p.m.

Rick

We have the two part j-b weld in (Home Depot)paint. Chambering reamers are available on line. You may be able to borrow one from one of the guys here.

Here's the dis-assembly. Remove the Cleaning Rod by pulling down on it & at the same time pull forward. Remove the barrel bands by pressing the band springs down & slide the bands off. Next remove the Tang Screw. Loosen the Lock Plate Screws slightly to remove the barreled action.

Care must be taken when pulling the action up that you do not chip the recess for the Tang. Soaking the stock at the tang area with gun oil will help.

If you are not comfortable doing this I will give it a try.

Ernie


Responses


Post a New Response

Your Name:

E-Mail Address:

Subject:

Please answer the riddle feature to prevent spam:    12 + 5 + 2 =

Message:



Return to the Trapdoor Collector home page via this link.