Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Next in Thread | Next ]


Taps/threads - SUCCESS!!!

Posted by Cary Meyers on Wednesday, 2 March 2011, at 7:15 a.m.

Just a follow-up...I received the little envelope from the UK yesterday and went to work. The taps were just about perfect (5/32-26 tpi) for the bad rear sight base hole. I used a drop of Break Free on the screw and snugged it down. VERY SWEET! I uses a layer of electrical tape over the slotless screw in the front with a 6mm socket to tighten it, and padded a needle nose pliers to tighten the rear slotless screw. There is almost no clearance to tighten that screw between the head and the ladder.

Cary


Responses


Post a New Response

Your Name:

E-Mail Address:

Subject:

Please answer the riddle feature to prevent spam:    1 + 16 + 0 =

Message:



Return to the Trapdoor Collector home page via this link.