Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next ]


Re: Frozen hammer/tumbler

Posted by FrontierWest on Monday, 24 January 2011, at 11:36 a.m., in response to Frozen hammer/tumbler, posted by Cary Meyers on Monday, 24 January 2011, at 7:55 a.m.

I'd use that muffed up screw for the hammer.. put it back in most of the way (with the lock off the gun).. and the inner parts stripped off... you need to have them removed anyhow to inspect them for cracks and cleaning... the give the hammer screw a sharp whack with a brass hammer. It may take a few attempts and the screw should settle down to flush with the hammer.. then unscrew a bit more and repeat the step until the tumbler is off.

Inspect the parts ect and clean. Should be easy enough with the right tools.

John


Responses


Post a New Response

Your Name:

E-Mail Address:

Subject:

Please answer the riddle feature to prevent spam:    0 + 1 + 0 =

Message:



Return to the Trapdoor Collector home page via this link.