Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: An answear...
Posted by Don Harpold on Sunday, 18 July 2010, at 11:49 p.m., in response to An answear..., posted by FrontierWest on Sunday, 18 July 2010, at 8:36 p.m.
"Our discussion is about a case separating during re-loading, and if so..why... as still they look like to me that they were intentionally cut with some kind of tool as they are very uniform in the cut and or separation."
I have had many cases separate in the manor you have described, ie: the case comes out of the chamber looking like it was hack sawed off at about 3/4 of an inch, I doubt that you would be able to duplicate a case separation like this in reloading even with an original set of reloading tools as it just doesn't happen, please refer to my previous post for the case of this separation, once I found the paragraphs in Blunt manual the separation was drastically reduced by following the manuals directions.
And I also have a set of tools.
Post a New Response
Return to the Trapdoor Collector home page via this link.