Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]
Re: Breechblock to Hinge Pin fit
Posted by Tom Trevor on Monday, 5 July 2010, at 4:22 p.m., in response to Breechblock to Hinge Pin fit, posted by Charly Busey on Monday, 5 July 2010, at 3:36 p.m.
Charly, The breech block was made that way , the force of recoil should be on the cam latch only and in fact you can remove the hinge pin and fire the rifle with perfect safety. [ take my word for it, do not try this at home as some un-named non-expert fool has done it with a rope on the trigger just to see if its true]. Hope this helps.
Post a New Response
Return to the Trapdoor Collector home page via this link.