Trapdoor Collector Discussion Board

[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next in Thread | Next ]


Re: h&r trapdoor carbine

Posted by THOP on Thursday, 10 December 2009, at 8:17 a.m., in response to Re: h&r trapdoor carbine, posted by Ernie on Wednesday, 9 December 2009, at 9:42 p.m.

Larry Gibson has provided some very valuable information on this subject in the past. Search on H&R breach block and you will get several hits. He describes fitting an original breach block to the H&R action. Another fix that has been described is drilling a shallow dimple in the shaft for the lock screw to seat into. Other cautionary advice is to just make sure from time to time to check the tightnes of the allen screw holding the lever to the shaft. Hope this help. THOP


Responses


Post a New Response

Your Name:

E-Mail Address:

Subject:

Please answer the riddle feature to prevent spam:    7 + 12 + 3 =

Message:



Return to the Trapdoor Collector home page via this link.