Trapdoor Collector Discussion Board
[ Read Responses | Post a New Response | Return to the Index ]
[ Previous | Previous in Thread | Next ]
Re: Priecing primers
Posted by Ernie Brandt on Monday, 17 November 2008, at 11:01 p.m., in response to Re: Priecing primers, posted by John S. on Sunday, 16 November 2008, at 10:56 p.m.
John is right.
Check the firing pin tip for wear.
I would buy a later alloy firing pin.
Do not try to alter your pin.
Also look at the cartridge case closely. The Primer should be seated firmly in the case. If the Primer protrudes above the surface of the case you will have perforation problems.
Post a New Response
Return to the Trapdoor Collector home page via this link.