Trapdoor Blocks


TOP to BOTTOM:
Type I M66 Block stripped with hinge strap. $25 + S/H.
Hinge Straps $10 each + S/H
Five locking Cams, $5 each + S/H
Two side plates, $10 each + S/H
Seven firing pin retainers, $6 each, Two washers and two hinge pin nuts, $6 each
Two extractor springs, $15 each + S/H.
Contact: Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.





LEFT to RIGHT:
1. Very Early M73 Block, complete for narrow receiver, $80 + S/H
2. High arch block, color case, second stamping, for narrow receiver, $90 + S/H
3. Low arch block for wide receiver,second stamping, $80 + S/H
4. Low arch block for wide receiver,second stamping, $80 + S/H
5. Low arch block for wide receiver, second stamping, $80 + S/H
6. Low arch block for wide receiver, second stamping, $80 + S/H
Contact: Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.




LEFT to RIGHT:
1. M68 Block dated 1870, $65 + S/H
2. SoldM73/M84 block for the wide receiver, $60 + S/H
3. M84 block for the wide receiver, $60 + S/H
4. M84 block for the wide receiver, but the face is pitted, $45 + S/H

Contact: Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.



LEFT to RIGHT:
1.M73/M84 block for the wide receiver, $65 + S/H
2.M73/M84 block for the wide receiver, $75 + S/H
3.M84 block for the wide receiver with pewter like finish, $70 + S/H
4.M84 block for the wide receiver with pewter like finish, $70 + S/H
Contact: Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.




Contact: Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.

45-70 & 50-70 TANGS

45-70/50-70 Tangs
All Sold Tangs:$30 each + S/H

*********************************************


TOP ROW: Left to Right:
#1A - 50-70 M68 Thumb Piece. $45 + S/H.
#2A - 50-70 M70 Thumb Piece. $45 + S/H
#3A - 50-70 M70 Thumb Piece. $45 + S/H
SECOND ROW:
#1B - Sold 45-70 M73 Thumb Pieces. $4 each + S/H
THIRD ROW:
#1C - Sold M66 - M88 Thumb Plates. $2 each + S/H
FOURTH ROW:
#1D - Sold M66(Type II) Thumb Pieces $20 each + S/H

Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.




Row 1 - Extractors:
Late: Cal.45 - $35+S/H,
Early: Sold Cal.45 - $40+S/H,
50 Cal:Sold - $40+S/H.
Row 2 - Rod and Spring sets for extractor - $20+S/H
Row 3 - Thumb Piece Spring - $4+S/H
Row 4- Long Hinge Pins: $12 + S/H
Row 5 -Short Hinge Pins: $18 + S/H Sold

Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.



Return to Parts Listings